Assembly Instructions
3
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
* After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Place Base (L) upside down on
a soft cloth then attach Legs (M),
(N), (O) and (P) to Base (L) with
Flat Washers, Spring Washers
and Head Cap Bolts (long).
(See Figure 1)
STEP 2
Turn the unit over to its’ upright position.
Insert Cam Lock Screws into pre-drilled
holes of the unit and Top (A).
(See Figure 2)
Attach Magnet to Top (A) with
Tapered Wood Screws. (See Figure 3)
Head Cap Bolt (long)
Cam Lock Screw
Cam Lock Screw
Magnet
Tapered Wood Screw
Spring Washer
Flat Washer
Figure 1
Figure 2
Figure 3
/4
L
A
M
N
O
P
