©2021 Lowell Manufacturing Co. UPS9A Series (X-Rev 8/13/20)
Pg. 13
Step 7: Turn on the UPS
Press the ON/Mute button on the front panel for two seconds to power on the UPS.
Note: The battery charges fully during the first five hours of normal operation. Do not expect full battery run
capability during this initial charge period.
Step 8: Install software
For optimal computer system protection, install UPS monitoring software to fully configure UPS shutdown. Use
supplied RS-232 or USB communication cable to connect RS-232/USB port of UPS and RS-232/USB port of PC. Then,
follow below steps to install monitoring software.
1.
Insert the included installation CD into CD-ROM drive and then follow the on-screen instructions to proceed
software installation. If no screen shows 1 minute after inserting the CD, please execute setup.exe file for
initiating software installation.
2.
Follow the on-screen instructions to install the software.
3.
When your computer restarts, the monitoring software will appear as an orange plug icon located in the system
tray, near the clock.
