10
1.
Align the clamp’s pins with the controller’s slots
and insert the pins.
2.
Slide the clamp up so it locks into place.
To remove the light stand clamp, press the clamp
release button. Slide the clamp down and pull it out
of the slots.
3.
Loosen the wing nut on the light stand clamp and
open the clamp.
4.
Fit the clamp around the shaft of a light stand,
and tighten the wing nut until the clamp is held
securely in place.
Attaching the Light Stand Clamp
Alternate method
Use the controller strap to hang the controller from one of the light stand’s locking knobs.
