Lowe Perfect Skin, Manual

Page: 6 / 15

PERFECT SKIN has 4 led indicators on the Control panel (n. 7, 8, 9,10) with the following
features:
Led light n.7
Fixed red light during the laser emission
Flashing red light for standby laser emission or charging battery
Led light n. 8 FACE
Fixed green light in case of Face treatment
Flashing green to indicate low battery
Led light n. 9 BODY
Fixed green light in case of Body treatment
Flashing green to indicate low battery
Led light n. 10 CREAM (CREAM CONVETANCE)
Fixed green light during the Cream treatment
Flashing green to indicate low battery
The LED indicators n. 8, n. 9 and n.10 simultaneously flash when the charging process is
finished.
DEVICE CHARGE
The battery charger supplied with the device complies with the safety directive of
information technology equipment EN60950-1.
We recommend that you do not use other battery chargers than the one supplied. The
use of any different battery charger might damage the device and invalidate the
warranty.
Once connected the battery charger to the device, before plugging it to mains or to a
computer, check that the device has not been damaged during transportation and
make sure that the characteristics of the power supply on mains comply with the
characteristics indicated on the bottom of the device.
Before using PERFECT SKIN for the first time, charge the batteries by following the following
indications:
1. Insert the battery charger connector to the plug at the bottom of the device
2. Plug the battery charger to mains or to a computer through USB port
3. The red led turns on: this indicates that the charging process in progress. Full charging
will take about 3 hours
4. To indicate the end of the charging process, all the green led lights start blinking
5. Unplug the battery charger from mains or the computer.
6. Disconnect the battery charger connector from the device, which is now ready to be
used.