5.
To adjust the upper part of the baby
carrier, pull the inside part of the tail
hanging out of the rings (near your
belly).
6.
To adjust the lower part of the baby
carrier, pull the outside part of the tail
hanging out of the rings (on your side).
ALWAYS GRAB THE TAIL NEAR THE RINGS.
7.
Follow steps 5 and 6 for the parts in
the centre.
You can therefore adjust the baby
carrier to fit closely round every part of
your baby’s body (under his thighs, his
bottom, his back, his neck...).
4.
Spread the fabric right across the ring.
17
BEWARE:
Make sure the material
isn’t twisted in the rings, to be able
to adjust the baby carrier easily
afterwards.
Once you’ve put the material through
the two rings, it won’t slide out and
will be fastened properly to hold the
child firmly.
It is only necessary to pull the material
out of the rings to wash and dry the
wrap, or to turn it around to change
colours.
CREATE A SMALL BOLSTER TO SUPPORT BABY’S HEAD:
1.
Take the tail hanging out of the
rings, place it across the nape of the
child’s neck and hold it under your
arm.
2.
Grab the upper hem of the wrap.
Fold it over the tail in order to roll it up
inside the upper part and form a small
bolster at the base of the baby’s neck.
3.
No sooner said than done! Very
practical when baby is sleeping or
under 4 months old, when he can’t
hold his head up.
It’s Up To You!
REVERSIBLE:
Your baby carrier is reversible, with one colour on each side. You
can use it on both sides (you will have to pull the tail out of the rings).
LEFT OR RIGHT:
You can use the baby carrier on the left and/or on the right side,
without pulling out the tail from the rings.
COMPACT:
To avoid the tail from hanging out of the rings, you can tuck it
under the baby’s bottom. You can also roll it up and put it in the hem under
his neck to support his head.
*optional
