Love Controls LCU 032, Instruction Manual

Page: 18 / 22

18
Relay
contact output
SSR drive
voltage output
Current output
Contact capacity: 240VAC 1A, 30VDC 1A (resistive load)
Contact: 1a
Output operation: P.I.D control, ON/OFF
Proportional cycle: 1-1000 sec.
Output limit: 0.0 - 100.0% range, higher limit (OH) or lower limit (OL)
selectable
ON/OFF hysteresis: 0-100% (Full scale)
Time resolution: 0.1% or 10mS
ON voltage: 24VDC min. (resistive load 600
Ω min., 30mA limit when
short)
OFF voltage: 0.1 VDC max.
Proportional cycle: 1-1000 sec.
Output operation: P.I.D. control
Output limit: 0.0-100.0% range, higher limit (OH) or lower limit (OL)
selectable
Time resolution: 0.1% or 10mS
Current output range: 4-20mA DC
resistive load: 600
Ω max.
Accuracy: ±0.5% of full scale (4-20mA range), Resolution: Approx.
3,000
Output ripple: 0.3% (P-P) of max. scale (150Hz)
Sampling time: 250mS
Output operation: P.I.D control
Output limit: -5.0-105.0% range, higher limit(OH) or lower limit(OL)
selectable
3. CONTROL OUTPUT
Power supply
Frequency
Power consumption
Insulation resistance
Dielectric strength
100-240VAC (90-264VAC)
50/60HZ
6.0W max., 10VA max.
Between primary terminal and secondary terminal: DC 500V, 20M
Ω min.
Between primary terminal and ground: DC 500V, 20 Ω min.
Between ground and secondary terminal: DC 500V, 20M
Ω
min.
Between primary terminal and secondary terminal: 2,300VAC 50/60 Hz for 1 min.
Between primary terminal and secondary terminal: 2,300VAC 50/60Hz for 1 min.
Between primary terminal and ground: 2,300VAC 50/60Hz for 1 min.
Between F-G and secondary terminal: 1,500VAC 50/60Hz for 1 min.
3) POWER SUPPLY
LCu032 9/6/05 1:34 PM Page 18