IsoVerter®II
Model 4130 and Model 4151
INSTALLATION INSTRUCTIONS
WIRING
Mount socket and wire per diagram.
OUTPUT
INPUT
POWER
Carefully remove the four screws from the bottom of the plug end.
Slide the cover off.
WARNING:
Do not plug in or power this device with
the cover removed. Potentially lethal voltage is present on
some of the internal components. Make sure that the cover
is firmly in place before plugging into the socket.
OUTPUT PROGRAMMING
For 0 to 10 VDC output turn switches one, two and three ON. Switches
four, five and six are OFF.
For 4 to 20 mA output turn switched one, two and three OFF. Switches
four, five and six are ON.
Replace cover. Make sure that the ZERO and SPAN adjustment screws
are visible through the holes in the top of the cover. Carefully replace the
four screws.
DO NOT OVER TIGHTEN.
