LOVCUBE W8, User Manual

Page: 23 / 28

21
Restore from backup
Before you attempt to restore your frame, start by confirming that your backup is up-to-date. This is done by
confirming the date under “Backup frame to external storage (e.g. micro SD card)”. If e.g. the last backup is too
old or if no backup is made, then press the “Backup frame to external storage (e.g. micro SD card)” button to make
a new backup.
NOTE: To keep both the old and the new frame operational at the same time after restoring from backup, please
make sure that both frames are updated to the latest version beforehand.
If you wish to restore a backup on a frame that has already been setup, then you must first reset the frame. This is
done by pressing the “Reset frame” button. This will delete all data on the Frameo and reset the Frameo to its
setup screen.
On the setup screen you can select the “Restore from backup” button which will restore your frame according to
the backup.
If the “Restore from backup” button isn’t visible, then confirm that the external storage (e.g. micro SD card) is
correctly mounted.
Reset frame
Open source libraries
Removes all data from your frame.
NOTE: This will permanently remove all your photos, friends/connections and settings.
Help
Opens a list of open source libraries used in the App and their licenses.
Share anonymous analytics data
Sharing anonymous analytics data helps us tremendously to improve the Frameo software. We understand if you
do not wish to share this data with us. Keep it checked if you wish to help us improve Frameo. Set unchecked to
deny the sharing of anonymous analytics data.
Guide
Opens the quick start guide, that was shown when you first started the frame.