Louvolite Roller Duo Roll, Fitting And Operating Instructions

Page: 2 / 12

Roller Duo Roll
Fitting and Operating Instructions
Roller Duo Roll
Fitting and Operating Instructions
Carefully unwrap the roller blind and its associated brackets.
The end brackets are universal and can be fixed in a top, face or side fix position.
The intermediate brackets can be either top or face fix only.
Note – Duo link fitting can only be used on system 40 and 45.
FITTING THE BRACKETS
Secure a control end bracket on the right hand side of the blind. Measure from
this bracket to a point the same distance as the width of blind number 1 and mark
the position.
Secure an intermediate bracket at this point ensuring the outside face of the
intermediate bracket lines up with the marked position.
Now measure and mark the distance from this intermediate bracket to the end
bracket on the left hand side of the blind and secure a control end bracket.
FITTING THE BLIND
NOTE: The right hand side blind must be fitted first.
With the fabric rolled around the tube insert the male idle end plug on the right
hand blind through the intermediate bracket. With this in place offer the control
end to the control end bracket and secure the blind in place ensuring the centre
lug has dropped into the bracket.
With the fabric wrapped around the tube on the left hand side blind, insert the
female idle end of the left hand side blind into the male idle end plug of the right
hand side blind. With this in place offer the control end of the left hand side blind
to the control end bracket and secure the blind in place ensuring the centre lug
has dropped into the bracket.