Set-up and operation
1. Select the channel for programming
Press “CHANNEL “ or “CHANNEL “ to choose the channel until the LED
highlights on the channel you want.
2. Follow ‘Pairing the remote with the motor’ on your One Touch™ 1100 series
remote control operated battery motor instructions - R1710.
For additional remotes repeat above steps on secondary remote transmitter.
PAIRING THE REMOTE WITH THE MOTOR
REMOVE ALL PRESET LIMITS.
1. Hold down the SETTING button on the motor
until it jogs 2 times and then release the button.
2. Select the channel for the blind using the
C/- button and press the CONFIRM
button within 10 seconds. The motor will jog 2 times
and the remote control is now paired with the motor.
REMOTE TRANSMITTER
Front
Back
Setting button (Red)
Primary
1
2
One Touch™ 5 Channel
Remote Control Instructions
