Operation
Step Operation
Result
Illustration
Selecting
a channel
1
Press the CHANNEL
+ or CHANNEL -
The blue light on the
remote will illuminate
which channel is
currently selected.
Setup
bottom
limit
1
Press and hold
LIMIT
button on the remote Motor jogs 3 times
2
Release the button
Motor is ready to set
limits
3
Press
DOWN
button
on the remote
Motor runs down
4
Press
STOP
button
when motor gets
close to the end-point
of lower limit
Motor stops
5
Press
DOWN
button
Motor runs step by
step to set lower limit
accurately
6
Press
CONFIRM
button on the remote
The motor jogs 2
times. The setting has
completed
Setup
upper limit
7
Press
UP
button on
the remote
Motor runs up
8
Press
STOP
button
when the motor is
running close to the
upper stop point
9
Press
UP
button
Motor runs step by
step to adjust upper
limit accurately
10
Press
CONFIRM
button on the remote
Motor jogs 2 times.
The setting has
completed
Setup mid-
point limit
11
Press
UP
or
DOWN
button on the
remote then press
STOP
when desired
mid-point height is
reached
Motor runs up or
down
12
Press and hold
LIMIT
button first then
whilst holding
LIMIT
press
UP
button on
the remote
Hold both buttons
until motor jogs. Mid-
point is now set
13
To move blind to mid-
point position press
STOP
Motor runs up or
down to mid-point if
not already at mid-
point
Primary
12
13
