CONNECTING NON-PoE SWITCH TO NON-PoE CAMERA OR ENCODER (See Fig. 5)
1. Connect Ethernet cable from Non-PoE Switch to the Power+Data Input Jack of the IF-PX.
2. Connect Ethernet cable from a Non-PoE Encoder or Camera to Data Out Only Jack of the IF-PX.
3. Connect DC Out Terminal Block to the power input jack of the encoder or camera. This Terminal block supplies
12Vdc power to the camera or encoder. It can also provide power to other external equipment such relays, etc. that
require a 12Vdc power. Connect 2 wires to the DC Out Terminal Block . At least 20 AWG wires can be use between
the IF-PX and the encoder or camera. Positive 12Vdc connects to terminal marked “+12Vdc” of IF-PX. Negative 12Vdc
or ground connects to terminal marked “GND”of IF-PX. Connect the other end of the 2 wires to the power jack or
terminal block of the encoder or camera. If the encoder or camera has a 2.1mm power jack, an adapter (2-pin terminal
block to 2.1mm male plug) can be used. Connect the wires to the 2-pin terminal block (
observe polarity
) of the
adapter. Plug the adapter to the 2.1mm power jack of the encoder or camera.
4. Connect an external power supply (not included) to the DC In Jack to power the IF-PX and the encoder or camera.
We recommend using a 12Vdc, 2A power supply.
5. Repeat same procedure when connecting Louroe Verifact microphone (steps 3 and 4 of
Microphone Connections
).
8
7
3
3
4
INSTALLATION AND OPERATING INSTRUCTIONS
Shipping Weight of the kit
3 Lbs
SPECIFICATIONS: IF-PX (UL Listed)
Ethernet Connectors
Voltage Input
DC Output
Operating Temperature
RJ45 CAT 5 Input and Output Jacks
12Vdc, 800mA
-20°C to +65°C
Optional Power Supply
12Vdc, 2A, Ext. Power Supply
(Not Supplied)
Connectors
Audio Output/Input
Audio Output Gain
Material
up to +15dB
Black Anodized Al 14 Ga
Line level
RJ-45, DC Jack,
Terminal Block for Microphone/Speaker
3.5mm Stereo Jacks for Audio IN/OUT
Dimensions
Weight
13oz.
6”L x 3 1/2”W x 2 1/8”H
36V - 57V
SPECIFICATIONS
(Microphone - Model A)
Frequency response
Current drain
Output
Supply voltage
50 Hz to 15 kHz ± 1 dB
10 mA
Line Level (0 dB 600
W
@ 1 kHZ)
12Vdc
Dimensions
Weight
3.5 oz
4"Dia x 1 ½"H
Ask4_350_inst 2/15
