[1]
Power-Volume
Turns “ON” power to the unit and controls the audio volume
through the
Speaker[9]
.
[2]
Power Indicator
Lights (green) when the power is present to the unit.
[3]
Mute Indicator
Lights (orange) when
Mute Switch[6]
is pushed in. Audio is muted.
[4]
Playback Indicator
Lights (yellow) when
Push for Playback[7]
is pushed in to “ON” position.
[5]
Overload Indicator Flashes (red) when there is a short in the power supply.
[6]
Mute Switch
Used to mute the audio on both live and playback mode.
[7]
Push for playback
Used for DVR/VCR playback. May also be used to listen to audio from an
external source. Press switch to listen to playback. Switch must be “OUT”
or “OFF” when monitoring and recording, otherwise live audio is muted.
[8]
Headphone Jack
Used for private listening. Any 3.5mm stereo headphone with 8
W
to
600
W
impedance can be used.
[9]
Speaker (3”) Provides live audio. Muted when a headphone is connected to
H
eadphone Jack [8]
.
DESCRIPTION
THE APR-1 IS SHOWN BELOW. ALL CONTROLS ARE LOCATED AT THE FRONT PANEL. ALL CONNECTIONS ARE
MADE AT THE REAR PANEL.
INSTALLATION AND OPERATING INSTRUCTIONS
FRONT PANEL LAYOUT OF APR-1
Page 2 of 8
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406
TEL (818) 994-6498
FAX
994-6458
website: www.louroe.com e-mail: [email protected]
(818)
®
APR-1
MUTE
PUSH FOR
PLAYBACK
PWR
MUTE
PLAYBACK
OVERLOAD
SINGLE
ZONE
AUDI
O BAS
E STATI
ON
OFF
MAX
POWER-VOLUME
[3]
[4]
[5]
[1]
[2]
[6]
[7]
[8]
[9]
TM
ASK4_101_RM_inst 1/15
