12
Operating Instructions for
LTS 138 / 150 SAC
A
ll data is without guarantee, errors and changes are reserved
.
LOTUS TRANSFER PRESS SOLUTIONS GmbH & Co. KG
Annotations
1. After you have pressed the "S" button (SET), "01" starts flashing on the display. When
the flashing has stopped, set the desired temperature in Celsius on the electronic dis-
play: "+" rises the temperature, "-" lowers the temperature. When the desired tempera-
ture is reached, confirm by pressing the "S" button.
2. After that you have to set the desired pressing time in seconds: "+" extends the time, "-
" reduces the time. If the switch is pressed a second time, the data is saved and the
temperature set before is shown again on the display. The heat transfer press is ready
for use as soon as the desired temperature is reached.
It is always possible to check time and temperature by tapping the "S" button.
Printing Process
Put the textile to be printed onto the supporting plate and smooth the fabric out. Then place
the transfer motif onto the textile. Now press the textile using the time and temperature val-
ues recommended by the manufacturer. Caps need to be tautened from behind with the
clamping fixture.
Switch off the transfer press when you do not use it.
Working programs
With the new control board
TS2 3P
4 different programs may be saved: the standard pro-
gram plus 3 new programs such as special programs for Flock, Flex or Sublimation trans-
fers. Owing to this new system you only need to enter the parameters required for you
transfer once.
