10
Feedback Signal
(Communication Code)
Function
Code
Why This Happens
Solution
Start/Cancel/Reset
Button was pressed
during the processing
cycle.
Accessory has been
removed during the
processing cycle.
Insufficient or no water
in accessory.
Excess time to com-
plete process cycle.
Reset the unit by unplugging from the
power outlet. Let the Giabo sanitizing
system sit for 30 minutes. Refill the
attachment with cold tap water to the
max. fill line. Place on the unit and
press the Start/ Cancel/ Reset Button
again.
your
Giabo Customer Care Department
at
(852) 2370 0121
or
email:
who will be more than happy to assist you.
Voltage Signal
* Re-start the process.
* Place Accessory on the docking
portal and lightly push it down on
the base.
* Check Center Reservoir is fully filled
with water. Slightly turn accessory
clockwise and counterclockwise to
drive air bubble out.
* Wait for a while, reset the unit by
pressing the Start/ Cancel/ Reset
Button.
* Check the Booster Cartridge for
expiration.
* Refill with fresh cold tap water to start
cycle again.
* Check Center Reservoir is fully filled
with water.
* While working, slightly turn accessory
clockwise or counterclockwise to
drive air bubble out.
