background image

 

LOTOS AR04 ARGON REGULATOR 

ASSEMBLY & OPERATING INSTRUCTIONS

 

Due to continuing improvements, actual product may differ slightly from the product described herein. 

 

Lotos Technology 

1155 Tasman Dr, Sunnyale, CA 94089

 

Visit our Web site at 

http://www.uwelding.com

 

 

Copyright  ©   2006  by  LOTOS

®

.  All  rights  reserved.  No  portion  of  this  manual  or  any 

artwork contained herein may be reproduced in any shape or form without the express 
written consent of LOTOS.

 

For technical questions and replacement parts, please call 408-739-2329 

Summary of Contents for AR04

Page 1: ...rein Lotos Technology 1155 Tasman Dr Sunnyale CA 94089 Visit our Web site at http www uwelding com Copyright 2006 by LOTOS All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of LOTOS For technical questions and replacement parts please call 408 739 2329 ...

Page 2: ...s invite injuries Use standard welding safety procedures to ensure safety cleanliness and efficiency of your welding experience throughout the entirety of this manual 2 Do not expose the tool or welder to damp or wet locations Do not expose to rain Keep area well lighted Do not use electrically powered tools in the presence of flammable gases or liquids Observe work area conditions always 3 Use AN...

Page 3: ...on damage to equipment or injury to the operator Compressed Gas Cylinders Regulators 1 Place and secure the cylinders together where they will be used on a welding cart wall work bench or post with chains Cylinders must remain in a vertical position and must always be properly secured 2 Remove protector cap from each cylinder and examine the outlet nozzles closely Make sure that connections and sc...

Page 4: ... clamps on the fitting end so the gas can still flow through the hose 3 Connect the other end of the hose to the welding machine 4 Check for gas leaks Once your machine fittings and installation is secured you can begin to operate your welding machine For technical support contact Lotos Technology by email at support lotostechnology com or by phone at 408 739 2329 Website www uwelding com Hours M ...

Reviews: