manualshive.com logo in svg

Lotek PinPoint Commander, User Manual, Page: 18 / 22

Share
Download
Lotek PinPoint Commander User Manual Download Page 18

 

LOTEK   |   

ID LIST CREATION AND DATA DOWNLOAD

 

 

17 

 

2.8.

 

Power Off 

 

 

The unit can be powered off for storage or transportation.  
To turn the PPC back on, press the Plus key for more than 5 seconds.

 

 

3.

 

ID List Creation and Data Download 

 

3.1.

 

Micro-SD Card Access 

 
The PPC comes with an internal micro-SD card that is not physically accessible by the user. However, the USB 
Drive feature under Tools menu effectively turns the PPC unit into a USB drive. This results in the PPC looking 
like a local drive to the PC. 
The only use of the USB drive is management of ID lists, downloading collected data files and uploading 
schedules. Use with the command functions within PinPoint Host. 
 

3.2.

 

ID List Creation 

 
Before heading out to the field to collect data, a list containing tags/collars IDs needs to be created. This ID list 
file must be created in the PP Host and the instructions are available in PinPoint Host user guide. The resulting 
list name is IDList.PPC and it is stored on PPC onboard micro-SD card. This is transferred to the PPC using the 
PP Host application under Tools>Upload IDList to PPC. 
 
The PPC has a limited memory space allowing up to 256 tags be searched at a time. If you have more than 256 
tags, the IDs should be divided into groups with each group containing up to 256 tag IDs. Up to 16 groups are 
allowed. The same ID may belong to more than one group. Each group name may contain a maximum of 8 
characters. 
 

3.3.

 

Data Download 

 
It is important that data is downloaded via the PinPoint Host using Tools > PPC Data File Transfer. Refer to the 
PinPoint Host user manual for more details. Do not download data from the PPC as if it was a USB drive, 
because essential file formatting occurs only when using PP Host for the transfer. 
 

Summary of Contents for PinPoint Commander























Reviews:

No comments