D
A
S t a r t / S t o p / R e s t a r t
R e s e t
S t a r t / S t o p / R e s t a r t
A
D
C
R e s e t
D
C
B
A
B
C
1
Pull out the crown when the second hand is
at the 12 o’clock position.
The second hand will stop on the spot.
2
Turn the crown to set the hour and minute
hands to the correct time.
3
Push the crown back in simultaneously with a
time signal.
T o s e t t h e h a n d s m o r e a c c u r a t e l y ,
advance the minute hand four to five
minutes ahead of the correct time, and
then slowly move the hand back to the
correct time.
■
H O W T O S E T T H E T I M E / C A L E N D A R
The analogue and digital displays are separately
illustrated in the following sections of this manual
for the purpose of explanation.
C R O W N
S e c o n d h a n d
M i n u t e h a n d
Hour hand
The display shows the time in your “Home
City.”
NOTES
•
In a case that the alarm is engaged, the alarm
will sound at the designated time of your
“Home City” time.
■
H O W T O U S E T H E S T O P WAT C H
1. Press “A” once to show the STOPWATCH mode.
2. Press “C” to start or stop the stopwatch.
Pressing “C” will alternately start or stop the
stopwatch.
3. Press “D” to reset to “00’00"oo.”
NOTES
✥
Even if the STOPWATCH mode is changed to a
different mode while the measurement is in
progress, it continues counting properly. After
the stopwatch is used, however, be sure to
stop it as the battery energy is consumed
enormously to shorten the battery life.
■
HOW TO USE THE COUNTDOWN TIMER
STOPWATCH mode mark
S e c o n d
M i n u t e
1 / 1 0 0 s e c o n d
H o u r
M i n u t e
1. Press and hold “A” for 2 to 3 seconds to show
the TIME/CALENDAR SETTING display.
The city code currently selected will flash at
the top half.
2. Press “B” to select the item to be adjusted
(flashing).
At this point, you can set your “Home City.”
Refer to “RETURNING TO THE “HOME CITY”
DISPLAY” for details.
TIMER mode mark
City code
M i n u t e
H o u r
S e c o n d
ANALOGUE TIME SETTING
1
2
3
TIMER SETTING
1. Press “A” twice to show the TIMER mode.
2. Press and hold “A” for 2 to 3 seconds to show
the TIMER SETTING display.
3. Press “B” to select the item to be adjusted
(flashing).
4. Press “C” or “D” to set the flashing digits.
The flashing digits move quickly if “C” or “D”
is kept pressed.
5. Press “A” to confirm the timer setting.
NOTES
✥
If the timer time is set for “0:00,” the timer does
not function.
✥
If the watch is left untouched in the TIMER
SETTING display with the digits flashing, it will
automatically return to the TIMER mode in 1
to 2 minutes.
Hour
«
Minute
DIGITAL TIME/CALENDAR SETTING
press A , C or D to return to the TIME/
CALENDAR mode, and then set the time/
calendar again.
City *
S e c o n d
M i n u t e
H o u r
Y e a r
M o n t h
D a t e
1 2 - / 2 4 - h o u r i n d i c a t i o n
‹
‹
‹
‹
‹
‹
‹
‹
LORUS NX11
05.9.29, 1:33 PM
Page 1
Adobe PageMaker 6.5J/PPC
