1. Attach the stand base to the wall or ceiling where you want to install the camera. Locate a
wall stud or ceiling joist and secure bracket using the supplied mounting screws.
2. Attach the camera to the stand and firmly tighten the swivel.
3. Attach one end of the 57ft cable to the camera; the other end to the monitor.
5
1. Camera 1 Input
Connect one end of the supplied 57ft cable to the first wired camera, the other end to camera Input 1.
2. Camera 2 Input
Connect an additional camera to the camera 2 input. (Not Included With the System)
Ensure the power switch on the monitor is set to the OFF position before proceeding with the
following steps.
NOTE
WIRED CAMERA INSTALLATION
MONITOR CONNECTIONS
IMPORTANT NOTE:
Keep camera installed away from direct sunlight. Also avoid places where humidity is high or
unable to protect from rain.