32
Network Connectivity
Network Connectivity
The SG15OD2844161 DVR Combo can be remotely controlled using your existing network and
the provided NetViewer software.
DVR
ROUTER
(Not Included)
PC
(Not Included)
INTERNET
1. Connect the DVR Combo to the
Router using the supplied Ethernet
Cable. Power the Observation unit
on.
NOTE: The System must be
connected to the router prior to
powering on the system. This allows
the system to communicate on your
network
2. Set up a web account at
http://
dips.dipserv.com
/. Refer to the
NetViewer Manual for setup and
configuration instructions.
3. Install the
NetViewer
software on
your PC. Refer to the provided
‘NetViewer Guide’ with your
product for details on using the
software.
4.
Find the IP address of your
Observation using the Lorex IPEdit
application. See Page 36 for details
5. Enable
PORT FORWARDING
on
your Router. Refer to the
instructions on Page 37 for details.
Summary of Contents for SG15OD2844161
Page 40: ......
