www.lorexcctv.com
LW2201AC1 SERIES QSG_EN_R1 Page 1
Contents:
Quick Start Guide
Digital Wireless Color
Camera with Stand
Wireless Antenna
for camera
Power Adaptor
for camera*
• Aim the Cameras to best optimize the viewing
area: Select a location for the camera that
provides a clear view of the area you want to
monitor, which is free from dust, and is not in
line-of-sight to a strong light source or direct
sunlight.
• Avoid installing the cameras where there are
thick walls, obstructions, or interference (i.e.
transformers, microwave ovens or other
electrical equipment) between the Cameras and
the Receiver.
• Select a location for the camera that has an
ambient temperature between 14°F~122°F
(-10°C~50°C)
• Before starting permanent installation, have
another person hold the camera for you while
you verify its performance by observing the
image on a monitor.
InstALLInG tHe CAMeRA
Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the
camera to the power adaptor.
InstALLAtIon WARnInGs
1. Carefully unpack the Camera.
2. Mount the stand to the wall:
• Mark the position of the
screw holes on the wall.
• Drill holes and insert the
drywall plugs as needed.
• Firmly attach the stand
to the wall using the
provided screws.
3. Attach the Antenna to the
Camera prior to mounting.
4. Place the camera in the
desired mounting position.
Tighten the thumbscrews
to secure the camera to the
Stand. Adjust the angle of
the camera until the
desired view is set.
*May not be exactly as shown
NOTE: AVOID INSTALLING IN A
LOCATION WHICH REQUIRES
THE WIRELESS SIGNAL TO PASS
THROUGH CEMENT, CONCRETE
AND METAL STRUCTURES. THIS
WILL REDUCE THE
TRANSMISSION RANGE.
Mounting
Screws
CoLoR DIGItAL WIReLess InDooR/oUtDooR
ACCessoRy CAMeRA
LW2201AC1 seRIes - qUICk stARt GUIDe
