Portable Wireless Color Video
Monitor And Camera
LW2001 Quick Start Guide
1 x Video Monitor with 2.4” LCD screen
2 x Power Adapters (for video monitor & camera)
1 x Wireless IR Night Vision Camera
1 x Rechargeable battery for video monitor
Includes:
LW2001 Quick Start Guide_EN_R2 - Page 1
Skill Level
Intermediate
easy
advanced
Time
under 30 minutes
under 15 minutes
under 60 minutes
Hand Tools
Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutes
under 15 minutes
under 60 minutes
Hand Tools
Hardware
Router
Hi Speed
over 60 minutes
Time
Tools
Skills - Easy
Under 5 Minutes*
Screw driver*
* Installation time may vary based on
application and camera cabling
NOTE:
AVOID INSTALLING IN A LOCATION WHICH
REQUIRES THE WIRELESS SIGNAL TO PASS
THROUGH CEMENT, CONCRETE AND METAL
STRUCTURES. THIS WILL REDUCE THE
TRANSMISSION RANGE.
*only for optional battery
operated use of the camera
Step 1
- Wireless Camera Installation
NOTE:
Wireless cameras require a power source (either an electrical outlet or battery power) to
operate. Battery operation option is offered for convenience in case of temporary portable camera
use (i.e. watch the kids play in the back yard). To prevent interruptions in the image, we recommend
using the included power adapter whenever possible.
Plug the Camera power cable into the
socket on the side of the camera. Plug
the power adaptor into a wall outlet
or surge protector.
Slide the ON/OFF switch to the ON
position. The LED on the camera
will light up (red).
The camera uses 4 AAA-Size batteries (not included)
LOAdING ThE BATTERIES
1. Loosen the screw on the bottom of the camera by using a
screw driver.
2. Open the battery compartment cover.
3. Insert 4 AAA-size batteries (follow the plus (+) and minus
(-) signs inside the battery compartment).
4. Close the battery compartment cover, and make sure it is
locked securely.
NOTE 1:
When the battery power is sufficient, the light is
constantly red; when the battery is low, the LED light will
start blinking.
NOTE 2:
Remove the batteries from the camera if you do not
plan to use it for a prolonged period of time.
NOTE 3:
Do not mix old batteries with new ones.
1
2
Press the night light button,
the night light LEDs will
remain ON.
how to use the Night Light
1. Antenna
2. Power indicator LED
3. Infrared LEDs
4. Lens
5. Supporting stand
6. Night-light button
7. Night-light
8. Microphone
9. Battery compartment
10. Power ON / OFF switch
11. Power adapter socket
Camera:
Night Vision
The camera has nine high-intensity LEDs for picking up clear
images in the dark. When the built-in photo sensor detects
low ambient light levels, the LEDs will automatically activate.
did you know?
You can move your camera around the house
or from one room to another with the use of
the included battery compartment.
NOTE
that the picture will turn black and white when the night vision feature
is activated because color cannot be reproduced in the dark.
NOTE: POWER uP ThE CAMERA BEfORE POWERING uP ThE VIdEO MONITOR TO ENSuRE
A PROPER CONNECTION.
Optional - Battery Operation
Audio Level Indicator
LED indicator lights display audio
level detected by the camera.
When the audio level increases an
increasing amount of lights light
up. This is perfect for situations
where surrounding noise (i.e.
running water makes hearing the
video monitor difficult)
