-12-
MONITOR CONTROLS - BACK PANEL:
1. Power Switch –
This button controls power to the entire unit. Depress the side with the ”•”
to turn power ON. Depress the other side to turn the unit OFF
2. Ethernet Input –
Connect the LAN cable for IP enablement to a computer (see the Software
CD and Quick Start Guide for further instructions)
3. RCA Audio inputs -
Channel 1-8 Audio inputs.(for cameras with standard RCA Audio output)
4. Alarm Function Terminals -
These terminals are used to connect external alarm devices
such as a motion sensor, door/alarm sensor, or time lapse VCR
5. Slave A/V Out –
Audio/Video Output signal for transmitting to a slave Monitor or VCR
6. VCR Audio/Video Out -
Use the A/V cables (not supplied) to transmit audio and video from
the monitor to a VCR
7. VCR Audio /Video In -
Use with A/V cables (not supplied) to receive audio and video from an
external source (VCR)
8. 6 Pin DIN Camera Inputs -
Channel 1-8 Camera inputs (for cameras with 6 pin DIN inputs)
9. BNC Camera Inputs -
Channel 1-8 camera inputs (for cameras with standard Video outputs)
10. AC Input -
Connects the attached power cord from the monitor to an electrical outlet
10 9 8
7
6 5
1 2 3
4