INTERNET REMOTE MONITORING
INTERNET REMOTE MONITORING
INTERNET REMOTE MONITORING
INTERNET REMOTE MONITORING
INTERNET REMOTE MONITORING
Continued
Continued
Continued
Continued
5
Open your web browser (Internet Explorer by default) and
enter
http://www.lorexddns.net
in the address bar.
DDNS (Dynamic Domain Name System) Set-up
http://www.lorexddns.net
1:
Populate the Router Database
3
The Auto Port Forwarding Wizard
automatically populates a list of
current routers, and detects the
number of connected routers.
1. Click the Next button after the
software detects your router
configuration.
2. Under Router IP, click the Detect Router IP button.
The router’s IP populates in the blank field.
3. Under Username and Password, enter the router’s
username and password.
4. Under IP, enter the IP address of your
Lorex device as recorded in Step 3-1.
5. Under Port, enter the port
number(s) that require forwarding
(80, 9000, 1025).
6. Click Next to continue.
80
Your IP
9000
1025
NOTE: Click the Auto Detect button if you have a
Linksys or Netgear router (this works with most models).
2:
Enter your Router Settings
1. Under the Router drop-down list, select the model of your
router OR click the Search button to enter the name of
your router model.
NOTE: Ensure you select the proper model and firmware
number of the router (as it appears on the back of the router)
IMPORTANT: Default ports that must be port forwarded
for remote access:
Port 80 (HTTP Port)
Port 9000 (Media RTSP Streaming Port)
Port 1025 (Mobile Connectivity Port)
4:
Test your Connection
1. Click the Test Your Connection button. Your system’s
default browser opens and connects to your Lorex device.
NOTE: Ensure that Internet Explorer is your system’s
default internet browser.
3:
Update the Router Settings
1. Click the Update Router
button. The program begins
updating the router settings.
This may take 20 - 30 seconds.
2. Close the update window
when the update finishes.
NOTE:
You may have to
manually save your router settings
after the software makes the
required changes to your router.
Auto Port Forward Wizard
1
The Lorex Auto Port Forwarding Wizard is a software that
automates router port forwarding.
NOTE: You must be on the same network as the DVR when
setting up the DDNS.
You must have the following before you configure the software:
1. Your router’s model and version numbers
2. Your router’s user name and password
3. Your Lorex device’s IP address (recorded in Step 3-1)
4. Your Lorex device’s port numbers that require port forwarding
(80, 9000, 1025)
Optional:
Manual Port Forward
4
If you were unable to port-forward your router
automatically using the wizard, you will need to
manually forward ports 80, 9000 and 1025 to
your DVR’s IP address.
All routers are different. To port forward your router, please refer
to your router’s user manual.
An example of a port forwarding screen is shown for
illustration purposes.
80
80
HTTP
EXAMPLE
9000
12
12
Media
9000
1025
12
Mobile
1025
STEP 4
STEP 4
STEP 4
STEP 4
STEP 4
REMOTE INSTALLATION GUIDE
Time: 30 Minutes
Skills - Intermediate
Hardware:
PC
Skill Level
Intermediate
easy
advanced
Time
under 30 minutes
under 15 minutes
under 60 minutes
Hand Tools
Hardware
Router
Hi Speed
over 60 minutes
Logging into DVR Web Client (REMOTELY)
To access your DVR remotely, enter the DDNS address
that you created earlier into Internet Explorer. The DDNS
URL must include http:// , your URL request, followed by
.lorexddns.net, a colon, then the hTTP port number
of your DVR.
http://
tomsmith
.lorexddns.net
:80
Example of a DDNS address:
URL Request
Colon
HTTP Port Number
9
Enable DDNS on the DVR
1. Click on Main Menu from the
menu bar, then click Network.
2. Click the DDNS tab.
3. Select Enable in the DDNS
drop-down menu.
NOTE: Please allow 10~15 minutes for the DDNS servers to update
with your new DDNS address. This is normal for the DDNS system.
Enter the following into the DDNS Setup menu:
• Domain Name: Enter the Domain Name/URL Request
that was emailed to you after DDNS registration.
• User Name: Enter your DDNS User Name that was
emailed to you after DDNS registration.
• Password: Enter your DDNS Device Password that was
e-mailed to you after DDNS registration.
Click Apply to save your settings.
Enter the DDNS Information into the DVR
10
11
Select Enable
Domain Name:
Enter Domain Name/
URL Request
User Name: Enter
DDNS User Name
Password: Enter
DDNS Device Password
1. Insert the system’s software CD, and follow the instructions
to launch the Lorex Auto Port Forwarding Wizard
software.
Installation
2
NOTE: The Wizard is PC compatible only.
Mac users, please go to Step 4-4.
Congratulations! You have completed Step 4 successfully. You
can now connect over the internet to view and playback video.
To install ActiveX® plug-ins on Internet Explorer:
1. Log in to your system using Internet Explorer.
2. Click the ActiveX banner and then click Run Add-on.
When connecting to your system the first time, you will have to
install an ActiveX plug-in for Internet Explorer.
Installing ActiveX Plug-ins
Run Add-on
LH130 ECO2 Series Quick Setup Guide - English - R3
3-07062012
For a full explanation of all the Web Client buttons and
features, please refer to the instruction manual.
Upon login, the Web Client main screen appears in your browser.
Navigation
Tabs
Active
Channel List
Viewing
Options
Split-Screen
Viewing
PTZ Controls
Main
Screen
Lorex Web Client Screen
For remote connectivity using compatible smartphones and
tablets refer to the instruction manual. Make sure to complete
Step 4 entirely. To connect remotely using Mac, refer to the
instruction manual.
Instant
Mobile
Viewing
Should you require further assistance, LOREX Tech Support
is available to assist you. Make sure to register your product
prior to contacting support at :
www.lorextechnology.com/support
1.
Click Step 1
2. Create a new My Lorex account or
sign in using an existing account.
6
Create Account
7. Click Save to register your product for DDNS. A DDNS
registration confirmation email will be sent to the email
address used to register for My Lorex.
NOTE: URL Request should not be more than 15 characters.
6. Fill out the My
DDNS form:
• Product Warranty:
Select the product
warranty you created
in the previous steps.
• Device Name: Enter a name for your device. You can
enter your name, business name, or anything of your choice.
• MAC Address: Enter the MAC address of your Lorex
system recorded in Step 3-1.
• URL Request: Enter the web site address that will be
used to connect to your Lorex system.
Complete New Account Information
7
3. Under Your Address,
select an address or click
Enter a New Address
to create a new address.
Fill in your address
information and click
Create Address.
1. Click Warranties.
2. Click Activate Warranty.
NOTE: Warranty Registration is required for DDNS.
4. Fill in the warranty registration
form with your product and
purchase details and click Save
Warranty. Check the sticker
underneath your DVR for the
Product Model Number and
Serial Number.
5. Click Set Up a New DDNS.
An automated REGISTRATION CONFIRMATION E-MAIL
will be sent to your email. Print and save this confirmation. You
will need to enter it into your system to enable remote access.
8
Registration E-mail
Domain Name/URL Request: tomsmith
DDNS User Name: tomsmith
DDNS Device Password: (your password)
EXAMPLE
Logging into the System
NOTE: Certain ISP (Internet Service Providers) block port
80. If you are unable to connect, check with your ISP and
consult with the user manual for instructions on changing the
web port. Make sure to port forward your revised web port.
1. Enter the user name and password, as shown below.
3. Select the Open All Channels
Preview check box.
4. Click Login to connect to the system.
Default login:
Username is “admin”
Password is left blank
