TROUBLE SHOOTING:
If the system does not function properly, please check the following points.
The HDD is full, and overwrite is not
enabled
Recording stopped
SOLUTION
PROBLEM
Check the jumper PIN connection.
Activate the Slave HDD in the Menu option
HDD SLAVE.
Slave HDD not
readable
DVR
Re-insert HDD as per Appendix #1.
Make sure that the HDD cartridge is
locked.
Check the jumper setting, it must be set to
MASTER
HDD not found
Remove the Key Lock
Keypad doesn’t work
Make sure the camera is not facing any
direct light or sunlight
Picture flickering or over
exposed
Check the cable connected at
the DVR, and at the camera
for any loose connection.
NO VIDEO
WIRED
CAMERA
-18-
