Lorex D861 Series, User Manual

Page: 65 / 122

Using the Main Menu 15
4. Click to enable ( ) / disable ( ) the selected event type.
5. Choose how the system will react when the selected event occurs:
• Show Message: Error message will appear on the recorder’s display.
• Record Channel: For Offline events only. Select the numbered tiles next to this option to
record video from the corresponding channels. Set the length of recording following a net-
work disconnection event in the
Post_REC field.
• Buzzer: The recorder will sound an audible alarm.
• Send Email: Send an email notification with details on the event (requires email configura-
tion — see 15.7.3 Configuring Email Alerts , page 68 for details).
6. Click Apply .
15.3.3 Searching Event Logs
Search all channels for events, including motion detection and video loss.
To search for events:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
2. Click Events , then click the Event Log tab.
3. Select an event type to search for.
4. Enter a start and end time for your search.
5. Click
Search
.
6. Events that match your search criteria are displayed:
• The
Type
column is formatted to show <
[Event Type]
:
[Channel Number]
>.
• Click Details to see more information on the selected event.
• Motion events have more options than other events. You can view the event by clicking
in the Playback column, or back up the video clip to a USB flash drive (not included)
by clicking
Backup
.
15.4 Backup
See chapter 10 Backup , page 28 for details.
15.5 Display
Set the system’s monitor resolution, configure Sequence mode, and other display settings.
#LX400111; r. 5.0/56647/56647; en-US 57