Lorex D841 Series User Manual Download Page 56

Page: 56 / 114

Using the Main Menu

To access the main menu:

•

From the Live View display, right-click to open the Quick Menu, then click

Main Menu

•

Click

on the Navigation Bar, then click

Main Menu

14.1

Playback

See chapter 9

Playback

, page 23 for details.

14.2

Alarm

Set preferences for alarm events such as video loss, motion detection, Person/Vehicle detection,
and system warnings. The Alarm menu is also used to set preferences for deterrence cameras.

14.2.1

Searching Alarm Event Logs

Search all channels for alarm events, including motion detection and video loss.

To search for alarm events:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

ALARM

, then click the

ALARM INFO

tab.

3. Select an event type to search for.

#LX400111; r. 1.0/55872/56018; en-US

Summary of Contents for D841 Series



















































































































Search results

Summary of Contents for D841 Series

Reviews:

Related manuals for D841 Series

Brands by name

Popular brands

Lorex D841 Series, User Manual

Search results

Summary of Contents for D841 Series

Reviews:

Related manuals for D841 Series

Brands by name

Popular brands