4K Ultra HD Motorized Varifocal
Bullet Camera
C861CF_QSG_EN_R1
• 4K Ultra HD Motorized Varifocal Bullet Camera
• Mounting Kit*
• BNC / Power Extension Cable*
• Power Adapter*
/
**
* Per camera in multi-camera packs.
** Only the included power adapter can be used. Do not use 4-in-1 or
8-in-1 power adapters with the camera.
Copyright © 2019 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right
to modify product design, specifications and prices, without notice and without
incurring any obligation. E&OE. All rights reserved.
• For a full list of compatible recorders, visit
lorex.com/compatibility
.
• To ensure that you are viewing camera video in full 4K resolution (4K monitor
required), check the video output resolution of your recorder. For full instructions,
see your recorder’s documentation at
lorex.com
.
• Not intended for submersion in water. Installation in a sheltered location
recommended.
• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes
between Day/Night viewing modes, an audible clicking noise may be heard from
the camera. This clicking is normal, and indicates that the camera filter is working.
Quick Start Guide
English Version 1.0
C861CF SERIES
Package Contents
ATTENTION:
A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this
camera (included).
Use of a non-regulated, non-conforming power supply can
damage this product and voids the warranty.
Dimensions
9.6” / 244mm
3.6” / 90mm
Disclaimers
www.lorex.com
Need Help?
Visit us online for up-to-date software
and complete instruction manuals
Click on the
Downloads
tab
4
Visit
lorex.com
Search for the model
number of your product
Click on your product
in the search results
3
2
1
Resources
Extend the cable run for your camera depending on the cable type used.
Additional extension cables sold separately. See table below:
Cable Extension Options
Option
Model Number
Cable Length
1
CB120URB1A
120ft (37m)
2
CB250URB1A
250ft (76m)
NOTES:
1. The extension cable must be a single stretch of cable between the DVR and
camera. You cannot connect multiple extension cables to each other.
2. Extending camera cable runs beyond the included cable length may require
you to connect the power supply directly to the camera rather than to the
extension cable.
3. Indicators that your cable run may be too long:
• Camera loses video when switching to night vision.
• Video is permanently black & white (even during day time).
• Video is unclear, soft, or distorted.
4. For more information on extension cables, visit
lorex.com
and search for the
model numbers of the cables above.
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity and voltage levels noted in the
camera’s specifications.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of intense light.
• Make sure you install the camera in a location that can support the camera’s
weight.
• Use only the supplied regulated power supply provided with the product. Use of
a non-regulated, non-conforming power supply can damage the product and void
the warranty.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh,
chemical-based cleaners.
• The supplied cable is rated for surface and in-wall mounting only. Cables for floor-
to-floor installations are sold separately (CMR type). These and other cables are
available at
lorex.com
.
Safety Precautions
