Page 6 of 30
Step 3
Attach the Top Panel (A) to the
Left Side Panel (C) as shown on the
drawing. Ensure that the Cam Screw
(1) properly engage with the Cam
Lock (2). With a Phillips Screw
Driver rotate the cam lock 1/2 turn
clockwise until snug. DO NOT
OVERTIGHTEN
Step 4
With the Back Panel (B) laying on
a non-abrasive surface insert with a
Rubber Mallet 2 each Wood Dowel
(4) in the position shown on the
drawing.
Insert with a Phillips Screw Driver 3
each Cam Screw (1) in the position
shown on the drawing.
Insert 4 each Cam Lock (2) in the
position shown on the drawing.
When inserting the cam lock ensure
that the arrow is facing toward the
cam screw entry.
Left side panel
Table panel
Back panel
LLR60138_60139_Manual_ENG.indd 7
LLR60138_60139_Manual_ENG.indd 7
3/4/11 4:10 PM
3/4/11 4:10 PM
