LLR60132/60134_080604
Page 7 of 33
Step 2
Lay the Right Side Panel (D) on a
non-abrasive surface.
Install with 3 each 4X14 Screw (8)
the 1 each right side Case Slide (9).
Please note on the drawing the
proper placement of the case slides.
With a Rubber Mallet, insert 3 each
Wooden Dowel (4) into the position
shown on the drawing.
With a Phillips Screw Driver, insert
2 each Cam Screw (1) in the
position shown on the drawing.
Insert 2 each Cam Lock (2) in the
position shown on the drawing.
When inserting the cam lock, ensure
that the arrow is facing toward the
cam screw entry.
Step 3
Insert 6 each Cam Lock (2) in the
position shown on the Back Panel
(E). When inserting the cam lock,
ensure that the arrow is facing
toward the cam screw entry.
Right side panel
Back panel
