12
INSTALLATION
Levelling the washing machine
Warning!
y
The lock nuts on all four feet must be screwed tightly against the housing .
1 . Check if the legs are closely attached to the cabinet . If not, please turn them to their
original positions tighten the nuts .
2 . Loosen the lock nut turn the feet until it closely contacts with the floor .
3 . Adjust the legs and lock them with a spanner, make sure the machine is steady .
Raise
Lower
Lock nut
Foot
Connect Water Supply Hose
Warning!
y
To prevent leakage or water damage, follow the instructions in this chapter!
y
Do not kink, crush, modify or sever water inlet hose .
y
For the model equips hot valve, connect it to hot water tap with hot water supply
hose . Energy consumption will decrease automatically for some program .
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe .
1 . Connection between ordinary tap and inlet hose .
clamp nut
Loosen clamp nut
and four bolts
Tighten clamp nut
Press slide bushing,
insert inlet hose into
connecting base
Connection finished
slide bushing
2 . Connection between screw tap and inlet hose .
Tap with threads and inlet hose
Special tap for washing machine
slide bushing
