Lord MicroStrain G-Link-LXRS User Manual Download Page 24

Page: 24 / 71

G-Link

-LXRS

Wireless Accelerometer Node

User Manual

System Operational Overview

3.8

Data Handling

Data acquired through Node Commander

is automatically saved on the host computer (

see

Sensor Data Files on page 28

) and can also be viewed from the web-based SensorCloud™

portal. Saved data can be uploaded to SensorCloud™ and Ethernet gateways provide the

option to automatically port the data to SensorCloud™ during data acquisition for near real-

time display and aggregation.

SensorCloud™ is based on cloud computing technology and is designed for long term

collecting and preservation of data. Features include time series and visualization graphing,

automated alerts, and data interpretation tools such as data filtering, statistical analysis, and

advanced algorithm development with the integrated MathEngine

interface. Leveraging the

open source API, SensorCloud™ can also be used to collect data from other LORD

MicroStrain

sensor products or third- party systems. Basic SensorCloud™ services are

available to all users free of charge (

see Connect to SensorCloud™ on page 25

Figure 14 - Data Storage, Display and Processing

Summary of Contents for G-Link-LXRS








































































Search results

Summary of Contents for G-Link-LXRS

Reviews:

Related manuals for G-Link-LXRS

Brands by name

Popular brands

Lord MicroStrain G-Link-LXRS, User Manual

Search results

Summary of Contents for G-Link-LXRS

Reviews:

Related manuals for G-Link-LXRS

Brands by name

Popular brands