3DM
®
-GX5-10
User Manual
3.2
System Connections
Power is applied to the sensor through a host computer USB
port or an external power supply, such as the one provided in
the RS232 connectivitykit. Use only power supplies within the
operating range of the sensor, or damage or injury could
result. Once power is applied the sensor is on and active (
).
To acquire sensor data the following components are needed: 3DM-GX5-10 sensor, communication
cable, power cable (as applicable for RS232 communications) , and a host computer with LORD
Sensing MIP Monitor installed.
Figure 5 -System Connections
11
