E-10
MUSIC EQUALIZER
- AT ANYTIME DURING PLAYBACK, PRESS
KEY REPEATEDLY TO
CHOOSE THE DESIRED SOUND EFFECT ACCORDING TO THE MUSIC YOU ARE
LISTENING TO :
EQ/SLEEP
E-0 = EQ OFF
E-1 = CLASSIC
OPERATION WITH THE iPod/ iPhone
- TURN ON BOTH THE UNIT AND THE iPod/ iPhone.
- CONNECT THE iPod
TO THE UNIT AS DESCRIBED.
- PRESS THE FUNC./ CL-SET KEY REPEATEDLY UNTIL THE DISPLAY SHOWS “iPod”.
- PRESS THE PLAY/ PAUSE
KEY ON THE UNIT, THEN THE FIRST SONG WILL
START PLAYING.
- THE iPod
DISPLAY WILL INDICATE THE INFORMATION OF THE CURRENT SONG.
- YOU CAN OPERATE THE iPod
USING EITHER THE UNIT'S BUTTONS,
OR DIRECTLY WITH THE iPod
ITSELF.
- WHEN THE iPod
HAS BEEN CONNECTED WITH THE UNIT, IT WILL START
CHARGING THE BATTERY OF THE iPod
.
- NEVER REMOVE (OR UNPLUG) THE iPod
FROM THE SET DURING PLAYBACK,
ALWAYS PAUSE PLAYBACK FIRST AND THEN PRESS THE FUNC/ CL-SET KEY TO
SWITCH TO ANOTHER SOURCE (EG. “RADIO”) BEFORE REMOVING OR
UNPLUGGING THE iPod
, TO PREVENT DAMAGE TO YOUR SONG FILES OR
MEMORY DEVICES.
/ iPhone
/ iPhone
- AT ANYTIME DURING PLAYBACK, PRESS THE PLAY/PAUSE
KEY TO PAUSE
PLAYBACK. PRESS PLAY/PAUSE
KEY TO RESUME PLAYBACK OF THE SAME
SONG & POSITION.
- AT ANYTIME DURING PLAYBACK, PRESS AND RELEASE THE SKIP- /SEARCH-
OR SKIP+ / KEYS TO SKIP FORWARD OR BACKWARDS BY ONE SONG,
AS DESIRED.
- AT ANYTIME DURING PLAYBACK, PRESS AND HOLD THE SKIP- /SEARCH-
OR SKIP+ / KEYS TO FAST-FORWARD (CUE) OR FAST-REVERSE
(REVIEW) THE SPECIFIC SONG, WHICH IS CURRENTLY PLAYING.
/ iPhone
/ iPhone
/ iPhone
/ iPhone
/ iPhone
/ iPhone
E-2 = ROCK
E-3 = POP
E-4 = JAZZ
"Made for iPod," "Made for iPhone," mean that an electronic accessory has
been designed to connect specifically to iPod, iPhone, respectively, and has been certified
by the developer to meet Apple performance standards. Apple is not responsible for the operation
of this device or its compliance with safety and regulatory standards.
Please note that the use
of this accessory with iPod, iPhone may affect wireless performance.
E-5 = BASS
E-9
ELECTRONIC VOLUME CONTROL
- THIS UNIT USES AN ELECTRONIC VOLUME CONTROL
.
- TO INCREASE OR DECREASE THE LOUDNESS OF UNIT, PRESS
THE VOLUME UP (VOL +) OR VOLUME DOWN (VOL -) KEYS RESPECTIVELY.
- RELEASE THE KEY WHEN VOLUME LEVEL IS AT THE DESIRED LOUDNESS.
- SOMETIMES, ESPECIALLY DURING LISTENING TO THE RADIO, YOU MAY NOTICE
A "CLICK-CLICK-CLICK" (REPEATING) SOUND WHEN YOU ARE INCREASING OR
DECREASING THE VOLUME. THIS IS A NORMAL CONDITION & THE SOUND WILL
DISAPPEAR WHEN YOU RELEASE THE VOLUME KEY (WHEN YOU REACH THE
DESIRED VOLUME LEVEL).
(PUSH BUTTON TYPE)
- AT ANY TIME, THE CURRENTLY DISPLAYED STATION OR FREQUENCY CAN BE
STORED INTO ONE OF THE MEMORY POSITIONS.
- PRESS MEMORY KEY UNTIL "C01" FLASHES IN THE DISPLAY.
- PRESS SKIP- /SEARCH- AND SKIP+ / KEYS TO SELECT DESIRED
MEMORY POSITION. (THERE ARE TOTAL 30 MEMORY POSITIONS).
- PRESS MEMORY KEY ONCE TO SAVE THE SELECTED STATION INTO THE
SELECTED MEMORY POSITION.
- TO RECALL ANY SAVED MEMORY, SIMPLY PRESS MEMORY KEY ONCE THEN
SELECT THE MEMORY POSITIONS BY PRESSING SKIP- /SEARCH-
AND
SKIP+ / KEYS THE SAVED RADIO-BAND WILL BE RECALLED.
- TO CLEAR THE MEMORY OF ANY POSITION, SIMPLY SAVE A NEW STATION TO
THE SAME MEMORY POSITION.
RADIO MEMORY (STATION PRESET MEMORY STORAGE)
OPERATION OF RADIO
- PRESS AND HOLD (FOR 2 SECONDS) THE SKIP- /SEARCH- AND
SKIP+ /
KEYS TO “SEEK” (AUTOMATICALLY ADJUST) THE RADIO
FREQUENCY “UP” OR “DOWN” TO THE NEXT AVAILABLE RADIO STATION.
- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY OF THE NEXT
STATION THAT IS FOUND.
- WHEN A DESIRED STATION IS REACHED. IT CAN BE SAVED INTO ONE OF THE
“MEMORY” POSITIONS. (SEE “RADIO MEMORY” SECTION).
AUTOMATIC FREQUENCY ADJUSTMENT (SEEK MODE)
- PRESS THE "ON/ STANDBY" KEY ONCE TO SWITCH ON THE UNIT.
- PRESS THE
KEY REPEATEDLY UNTIL THE DISPLAY SHOWS "FM".
- EXTEND AND ADJUST THE FM-WIRE ANTENNA TO OBTAIN THE BEST RECEPTION.
FUNC./CL-SET
MANUAL FREQUENCY ADJUSTMENT (SCAN MODE)
- PRESS (AND IMMEDIATELY RELEASE) THE SKIP- /SEARCH- AND
SKIP+ / KEYS TO “SCAN” (MANUALLY ADJUST) THE RADIO
FREQUENCY “UP” OR “DOWN” BY 1-STEP AT A TIME.
- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY AT EACH
STEP’S POSITION.
- WHEN A DESIRED FREQUENCY OR STATION IS REACHED. IT CAN BE SAVED INTO
ONE OF THE “MEMORY” POSITIONS. (SEE “RADIO MEMORY” SECTION).
