AGP Insert Hopper Replacement
(SKU 250-05675)
Page 4 of 7
17602198.docx — 1/8/21
© Travis Industries, Inc.
4. Remove surround panels. Pull the panels a little forward of the insert to gain access to the back of
the control board and disconnect the wire harness. Carefully guide the surround panel over the
hopper lid taking care to prevent scratching the paint.
5. Use a 1/4” nut driver to remove the (2) screws that secure the surround panel mounting brackets to
the insert (both sides of the insert). Carefully cut the (3) zip ties indicated below.
Remove using
Cut with
