P.4
END OF LIFE OF PRODUCT
REFERENCE
MAINTENANCE
At the end of life of the product, do not dispose it in a site which is not intended for
this purpose. This product must be treated as a bulky waste and carried to a recycling
center or waste sorting center.
Lubricate the mechanical parts (sliding, moving and/or adjustable parts etc) by using dry
silicone-based lubricants when necessary. Clean regularly the fabric parts with a damp cloth.
Air dry. Do not iron.
Check the status of the product periodically.
The product should be stored in a mild environment of which the temperature is between 8ºC
to 30ºC. Avoid conditions lower than 0ºC or higher than 30ºC.
France
ABB Diffusion
- 13 RUE VOLTAIRE, 82000 MONTAUBAN
Product reference PAR63/P630+
Made in China
www.looping-baby.com [email protected]
- When door closed, verify that it’s well in place; the zip is closed up to its
end. Make sure that the child cannot open the door by itself.
- Not intended for a child more than 15kg. When the child can sit up by
itself, you can consider opening the door. This usage must be supervised
by an adult.
- WARNING - do not use the playpen without the base (padded support).
- Never leave your child unattended.
WARNING SPECIFIED FOR THE BED FUNCTION (DOOR
IMPERATIVELY CLOSED AND WELL FASTENED. NO HANDLE.)
WARNING SPECIFIED FOR THE PLAYPEN FUNCTION
(DOOR OPENED OR CLOSED. WITH OR WITHOUT HANDLE)
- Never place one more than one child inside the bed.
- The door must imperatively be closed and well fastened. Ensure that
the door is closed; the zip is closed up to its end. Make sure that the child
inside cannot open the door by itseld.
- Never use the handles while the product is used as bed.
- To prevent injury from falls, when the child is able to climb out of the cot,
the cot shall no longer be used for that child.
- Be aware of the risk of open fire and other sources of strong heat, such
as electric bar fires, gas fires, etc. in the vicinity of th cot.