For Microsoft Windows 2000/XP:
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will appear.
2.
Move mouse and double-click the right button on
Network and Dial-up Connections
icon. Move mouse and
double-click the
Local Area Connection
icon. The
Local Area Connection
window will appear. Click
Properties
button in the
Local Area Connection
window.
3.
Check the installed list of
Network Components
. If TCP/IP is not installed, click the
Add
button to install it;
otherwise go to step 6.
4.
Select
Protocol
in the
Network Component
Type
dialog box and click
Add
button.
5.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK button to install the TCP/IP
protocol, it may need the Microsoft Windows CD to complete the installation. Close and go back to
Network
dialog box after the TCP/IP installation.
6.
Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7.
Select
Specify
an IP address
and type in values as following example.
9
IP Address:
192.168.1.1
, IP address within the range of 192.168.1.1 to 192.168.1.253 is used to connect the
WLAN AP Router.
9
IP Subnet Mask:
255.255.255.0
For Microsoft Windows NT:
1.
Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.
2.
Move mouse and double-click the right button on Network icon. The Network window will appear. Click Protocol
tab from the Network window.
3.
Check the installed list of Network Protocol window. If TCP/IP is not installed, click the Add button to install it;
otherwise go to step 6.
4.
Select Protocol in the Network Component Type dialog box and click Add button.
5.
Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install the TCP/IP
protocol, it may need the Microsoft Windows CD to complete the installation. Close and go back to Network
dialog box after the TCP/IP installation.
6.
Select TCP/IP and click the properties button on the Network dialog box.
7.
Select Specify an IP address and type in values as following example.
9
IP Address:
192.168.1.1
, IP address within the range of 192.168.1.1 to 192.168.1.253 is used to connect the
WLAN AP Router.
9
IP Subnet Mask:
255.255.255.0
8.
Click OK to complete the IP parameters setting.
- 14 -
