6
2. The Transmitter
The following signals will be shown at the transmitter:
- Accurate radio signal:
Blue and red LED will flash.
- Fogging process started:
Both LEDs flashes (confirmation of a correct radio signal). After 4 to 5 times the red
LED stops flashing while the blue LED continues flashing as long as the button is
held down.
- Button used which is not configurated (Buttons 2 to 4 at delivery):
Blue LED flashes shortly.
- No radio signal or transmitter too close to the receiver:
Blue LED flashes for a longer period very quickly.
2.3 Replacing the battery
The life of the battery depends on the use of the radio transmitter. If the range is
strongly reduced or transmission is not possible, the battery must be replaced. Only use
standard 12 V-alkaline batteries.
Loosen the screw with a suitable screwdriver and dismantle the two halves of the
casing. Remove the depleted battery and insert the new one. Pay attention to polarity
and test contact of the battery by trying to transmit.
