7
4. Fluid
5.1 Selecting the Location
The location for the
Power-Tiny
must
• be dry
• guarantee sufficient air supply
• have sufficient distance (at least 2 ft) from inflammable materials
• have very little vibration
• have an ambient operating temperature between 40
°
F and 115
°
F
• have a relative air humidity of less than 80%.
5.2 Mounting the Power-Tiny
If the
Power-Tiny
is to be built in props or similar, make sure that a fog-free air
supply is guaranteed. Too high fog concentration can condense inside the machine
and can result in damages caused by moisture.
When installing the
Power-Tiny
make sure that
• no fog is passed back into the fog generator,
• no condensed fluid runs into the apparatus,
• no objects jut out into the fog nozzle [2]
1) Pour the TINY-FLUID into the fluid bottle and firmly lock the bottle. Plug the
connecting spout of the fluid tubing into the quick connector of the fluid
bottle (audible click).
Check the cleanness of the fluid bottle, so that no dirt (fluff etc.) can be sucked
in by the pump. Even the smallest impurity immediately leads to clogging of
the machine.
2) Connect the battery pack to the machine. Therefore plug in the battery
connector (Speakon) [6] into the socket [12]‚ at the back of the machine.
3) Press Start-key (grey) [1] briefly.
4.1 General
The
Power-Tiny
is built to be used with original Look Tiny-fluid. Use of other
liquids will clog the vaporizer and void the warranty.
5. Operating the Power-Tiny
5.2 Starting-up the Power-Tiny
