How to Use
1.
Drain the residual waste sufficiently.
2.
Open the inlet and put the residual waste
into the basket.
3.
Insert the food waste and press the power
button to automatically activate the product.
4.
While the product is in operation, the UV LED
button can be pressed to activate or deactivate
the UV LED sterilization.
UV LED will turn off automatically after 5 hours.
Once the drying mode is activated, after 19 hours the product
will automatically change to the air blow mode.
Once the door opens and closes, the operating time will be automatically reset.
The UV LED sterilization will be automatically activated once the power button is pressed
to start the drying mode. UV LED will turn off automatically after 5 hours.
The maximum daily processing capacity is 1kg.
Make sure not to exceed the maximum daily processing
capacity or put an excessive amount at once.
Doing so may decrease the drying efficiency, create
a bad odor and decrease the filter lifespan.
In the case where any food waste with a bad odor
exceeding the processing capacity of the filter is
processed, it is possible that a bit of odor may be created.
Rinsing such food waste once with water and draining
it prior to its processing contribute to extending
the filter lifespan.
4.
Once the drying is complete,
empty the basket.
04
*
If you turn off the product during working, It will operate air blow mode for 1 minute
before turning off the power completely.
Power
UV LED
Power
UV LED
