Backup via USB flash drive
Insert the USB flash drive. Right click > Main Menu> Backup > select channel and time >
Search >select the video clips > Backup > select storage media > Start.
System Upgrade via USB flash drive
You can contact our official customer service or download the latest program directly from
the official website. Copy the firmware file to the root of USB flash drive. Then proceed as
follows:
First plug in the USB flash drive, and then unplug the NVR power supply. Plug in the power
plug, you will see an "upgrading" upgrade interface on the monitor. Please wait for a while.
After the upgrade is completed, unplug the USB flash drive and the upgrade has
completed.
Note:
After the upgrade is completed, please do not restart the power supply when the U
disk is still plug in, otherwise the system will perform the upgrade again.
Motion Detection
After setting motion detection, the NVR will only record when it detects movement or activity.
Right-click > Main Menu> Setup > Alarm > Motion.
Select the camera you want to setup motion detection by ticking the box under ‘Enable’
Human Figure Detection
This NVR supports human figure detection. When human figure is detected, it will trigger
alarm/recording. Combining motion detection and human figure detection, the false alarm
rate will decrease.
Note:
An icon will be shown when motion is detected by the camera and the system will
start recording.
09
08
5. Setup for Remote Viewing
(Smartphone)
