Explored Drawing
：
*Operation Instruction
First Operation, put unit under the room temperature for half of an hour before running.
It is recommended to use the unit under temperature of 5-40C, relative humidity less than 80
％
RH.
Use clear water not over 40C.
Check the water basin, make sure it is clear.
Operation steps:
1. Take the water tank out of the base,open the Valve-cup,and fill the water tank with clear water.
Close the Valve-cup,and put the water tank onto the base carefully.
2. Put the nozzle into the socket on top of the water tank .
3. Connect the main supply,switch on the unit (NEVER RUN THE UNIT WHEN THERE IS NO
WATER IN WATER BASIN), the main connection lamp will on. The unit starts working.
*Trouble Shooting Guide
Any trouble found in normal operation, please kindly refer to the following points:
Trouble
Possible reasons
Shooting Way
Power lamp off, does not work
No power supply
Connect power supply, switch on
Power lamp on, no mist outlet
with wind
No water in water tank
Fill water into water tank
Security switch is too low
Make the switch where it should
be
