33
Right and left glance is dangerous when
operating the machine; therefore, the operator
shall concentrate on his work.
Too fast traveling, sudden start, sudden stop,
sudden turn or zigzag traveling is dangerous.
Adjust the height of working device below the lift
arm and keep a clearance of 500-600mm
(20-24in) from the hinge pin and ground, let the
machine walking on the level ground. Do not
operate the pilot joystick during running. If it is
necessary to operate the pilot joystick of working
device, first stop the machine, and then operate
the pilot joystick.
If the working condition is in water condition, it
shall not exceed a permitted depth.
When passing through a bridge or private
structures, check whether their bearing capacities
can support this machine. When walking on
public road, firstly it shall be in comply with the
provisions of related authorities and traffic laws
and regulations. The speed of this loader should
lower than normal speed of a car. Walking in the
aside road, leave the center of the road to other
vehicles.
If this machine has run for a long time, its tire will
be overheated, and its internal pressure becomes
extremely high. It may cause tire to blow up and
produce great destructive power, and then may
cause serious injuries or accidents.
1.5.7 CHECK WHEN CHANGING DIRECTION
In order to prevent injury or death, even though the machine is equipped with a backup
alarm and rearview mirror, you must comply with the following rules before moving the
machine or its working devices.
