Product Features
Product Overview
Our doorbell is a Wi-Fi enabled Smart Video
Doorbell which helps you to see, hear and speak to
anyone at your door from your smartphone or tablet
f r o m a n y w h e r e . T h i s Vi d e o D o o r b e l l s u p p o r t s
answering ring calls from mobile App, two-way
audio, instant alert, motion detection and live
monitoring.
Install your Wobell
A brief introduction of the Wobell.
Working Temperature
Storage Temperature
-20°~ 60° C
-40°~ 70° C
Push Notications within
1 second
Notications
Check out all the accessories in the box
1 Screwdriver
5 Anchors
5 Mounting screws
Speaker
Terminals
(connect the doorbell power)
Lens
Infrared LEDs
PIR Motion Sensor
Storage
Connectivity
Power consumption
Battery
Limited distance
between doorbell
and chime indoor
Video Compression
Voice Intercom
Video resolution
FOV/160°C Wide-angle
lens (4Glass)
5 meters PIR distance
Up to 32GB Micro SD card
802.11b/g/n [email protected]
Two 18650 specication batteries
6pcs Infrared LEDs with
5 meters ash distance
60 meters (open space without
obstacle)15 meters (indoor)
30 meters
H.264
Two-way audio with noise
cancellation
1280*720@30 fps
Product Specication Sheet
Wi-Fi distance
Step 1:
Install anchors (on stucco, brick or concrete)
On stucco, brick or concrete, use the bit to drill two
holes in your wall, and install the anchors.
PIR
Camera
Call button
Extra Wires
existing wires
Device Wakeup
Within 600 ms
Two 18650 specication batteries work regularly
for 8-12 months
HD Megapixels collocated with wide-angle lens
Support mobile phone remote fast wakeup within
1 second
2.4G Wi-Fi connection
High quality two-way talk with noise cancellation
Support PIR motion detection, when someone hovers
at the door, it will send push alerts to your mobile phone
immediately
With IR-cut,it can switch automatically and it is
clearly visible at both day and night to keep your
home and family safe.
Mic
RESET
Reset button
USB
AC IN
Step2. Pls unscrew the screws of the back battery
compartment and remove the cover, then install one
or two pcs 18650 battery.
Battery
compartments
screws
Step 5:
Mount and screw your device to the back patch
board on the wall (screw on the bottom of the device).
Screws for double protection
Volume settings
Press the volume key once to trigger one time,
5 levels volume cycles from low to high . In
mute mode, only ashing light when press the
remote control .
Music key
Press once to trigger one time, press for next
music to play once.
Change the ring
The indoor chime has 18 kinds of music for
options. You can press the music key to choose
your favorite music
.
Press the volume button for 5 seconds till a
prompt tone “Ding”, then turn into learning
mode, press the doorbell button right now, when
the indoor chime made a" Ding …Ding "prompt
tone, means the relevant music of indoor chime
triggered by the doorbell was changed.
Indoor chime user manual
Volume key
Music key
18650 Battery
At the same time, this device support AC8-24V power
supply and battery charging. If you need external power
supply, please go to step 3.
Step3:
Connect the back patch board to your existing wires .
Step 4
：
Install the back patch board of the doorbell
to the wall using the provided screws.
+
-
Please install the battery after
identifying the battery polarity.
!
Battery-powered WIFI video doorbell
LY-101
Shenzhen Longzhiyuan Technology Co., Ltd.
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment
。
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
—
Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV
technician for help
The distance between user and products should be no less than 20cm
