Longtime LCH-1215A, User Manual

Page: 5 / 27

Section 1: General Safety and Installation Instructions
1 ‐ 1 Operating the Device Safely
Failure to observe this instruction can cause material damage, device malfunction or
danger of bodily injuries.
Fundamental safety measures should be observed when using electrical equipment to
avoid the danger of electric shock, fire hazard, injury..
1 ‐ 2 Safety Instructions when Installing the Device
z
Handle the batteries with care, the batteries contain strong acids.
z
Avoid contact with the battery fluid agent.
z
If come in contact with battery fluid, one should rinse the affected parts of the body or clothing
with plenty of cold water and seek medical attention immediately.
z
Be sure that the device has a firm foundation.
z
Do not use sharp or hard objects to clean the device. Doing so may cause device damage.
1 ‐ 3 Electrical Cables
If cables have to be fed through metal walls or other walls with sharp edges, use ducts or wire
bushings to prevent damage.
z
Lay the cables so that other people will not trip over them.
z
Do not lay cables which are loose or bent next to electrically conductive materials.
z
Do not pull the cables.
z
Fasten the cables properly.
z
Lay the cables so that they can not be easily damaged.
z
Always use sockets that are grounded and secured by earth leakage circuit breaker.
z
Only a specialist should make the electrical connections.
z
Do not lay the 115VAC/230VAC line and the 12VDC in the same cable duct.
z
Keep to the indicated minimum cable cross ‐ section.
1 ‐ 4 Installation on Boats
z
Incorrect use or installation of the charger on boat may lead to corrosion of the boat. Please
allow qualified personnel to perform the installation of the charger.
4