manualshive.com logo in svg

Longshine PS960GLE, User Manual, Page: 29 / 55

Share
Download
Longshine PS960GLE User Manual Download Page 29

PS960GLE/ PS965GME Mainboard 

25 

 

Video 

This field selects the type of video display card installed in your system. 

You can choose the following video display cards: 

EGA/VGA   

For EGA, VGA, SEGA, SVGA or PGA monitor adapters. (default) 

CGA 40   

 

Power up in 40 column mode. 

CGA 80   

 

Power up in 80 column mode. 

MONO   

 

For Hercules or MDA adapters. 

 

 

Halt On 

This field determines whether or not the system will halt if an error is detected during power up. 

 

All errors 

Whenever the BIOS detects a non-fatal error, the system will stop and you will be prompted. 

No errors 

The system boot will not be halted for any error that may be detected. 

All, But Keyboard (default) 

The system boot will not be halted for a keyboard error; it will stop for all other errors. 

All, But Diskette 

The system boot will not be halted for a disk error; it will stop for all other errors. 

All, But Disk/Key 

The system boot will not be halted for a keyboard or disk error; it will stop for all others. 

 

 

Summary of Contents for PS960GLE
























































Reviews:

No comments