Wireless 11n 1T2R PCI Card
Chapter 2 Installation Guide for Windows
2.1 Hardware Installation
1. Make sure the computer is turned off. Remove the expansion slot cover from the computer.
2. Carefully slide the Wireless 1T2R PCI Card into the PCI slot. Push evenly and slowly and make
sure it is properly seated.
3. Secure the antennas on.
4. Turn on your computer. Windows detects the new hardware automatically.
2.2 Software Installation
2.2.1 Overview
The following driver installation guide uses Windows XP as the presumed operation system. The
procedures and screens in Windows 2000 are familiar with Windows XP.
1. The system finds the newly installed device automatically. Click
Cancel
to close this window.
- 8 -
