
WWW.LONGS-MOTOR.COM
2
Electrical specification:
Input voltage
24-80VDC
Input current
<
6A
Output current
2.8A
~
7.8A
Consumption Consumption
:
80W
;
Internal Insurance
:
10A
Temperature
Working Temperature -10
~
45
℃;
Stocking temperature -40
℃~
70
℃
Humidity
Not condensation, no water droplets
gas
Prohibition of combustible gases and conductive
dust
weight 500G
Pins assignments and description:
1) Connector Pins Configurations
Pin Function
Details
PUL +,PUL-
Pulse signal, PUL+ is the positive end of pulses input pin
PUL- is the negative end of pulse input pin
DIR+,DIR-
DIR signal: DIR+ is the positive end of direction input pin
DIR- is the negative end of direction input pin
ENBL+
Enable signal: ENBL+ is the positive end of direction input pin. This signal is used for
enabling/disabling the driver. High level for enabling the driver and low level for disabling the
driver.
ENBL-
ENBL- is the negative end of direction input pin. Usually left unconnected (enabled)