5
Troubleshooting
5.1
Motor doesn’t start
1. Make sure power switch is ON.
5.2
Motor starts, but no spray
1. Make sure the flow-rate adjust knob is not at 0.
2. Check the solution level in the tank.
3. Check the tank lid is tight.
4. Check the rubber gasket under the tank lid.
If the gasket is missing or
loose, there may be a pressure leak, and the unit will not spray.
5. Look for the solution intake tube at the bottom of the tank.
6. The filter at the end of the intake tube may be clogged. Rinse out or
replace the filter.
7. Fill the solution tank to 2/3 full with water and try again.
6
