72
Self-winding watches
L633 – DIVER
Shows the hours, minutes and seconds and also enables
the user to check his or her diving time.
Your
Longines Legend Diver Watch
has 2 crowns,
A
and
Diver
, which can be used for specific functions (fig.
햲
).
Crown A: 2 positions
Winding
(crown pushed right in)
The natural movements of your wrist will automatically
wind your Longines watch, which has a power-reserve
of 42 hours. It is only necessary to wind your watch man-
ually if it has not been worn for several days.
Adjusting the time and stop seconds
Unscrew crown
A
and pull it out to position
2
. The sec-
onds hand will now stop. Adjust the time by turning the
crown in either direction. Synchronise your watch with
a time signal (telephone, radio, TV) and then push the
crown
A
back in to position
1
, and screw in firmly.
Diver screw-in crown
Verifying your diving time
Unscrew the
Diver
crown. When you start diving turn the
rotating bidirectional ring to adjust the needle to the
minute hand. Push the crown back in again and then
screw in firmly (fig.
햳
).
You can read off your diving time from the minute hand
on the graduations of the rotating bidirectional ring (fig.
햴
).
The example shows: 15 minutes diving time.
햴
햳
L633 – Diver
햲
Anglais ME Longines
7.4.2010
11:44
Page 72
